need some help with lights

[johntony]

any ideas how to fix or were i would get something to fit the last owner drilled the bumper himself and put in side repeaters only thing is they are 50mm and the hole is 50mm

[Bernard]

How about fitting something like this instead?
A little extra cold air is always good



http://www.hostileperformance.co.uk/HPitemdetail.php?v=FTO&vm=Mitsubishi&m=POWERTEC&id=PTCOLDAIRFEEDS

[Dragonheart]

Would cover up the hole nicely and look like it was totally intentional.

[colm_mcm]

on both sides?

[Bernard]

on both sides?

Sure why not? Fill the holes wouldn't it?

[Dragonheart]

Might as well take the headlights out and put some in there too.
Christ that reminds me! I was on site last year and there was an Evo in the car park, had what looked like an exhaust coming out just behind the front wheel arch. I presume it was an exhaust cause there was a black smoke trail up the side of the front panel and along the door a bit! Anyone seen this before? Seems a bit mad if you ask me!

Oh, you could alwaya fill those holes by fixing something behind them and filling with a plastic resin I presume could you?

[crayzidane]

Yea its called a screamer pipe, often used on cars running huge power,
when the rpm reaches a pre determined rev a valve in the exhaust system opens, so it doesnt have to travel to the back of the car to exit and go through muffler etc, hence called a SCREAMER pipe. Seen this in TOTB a few years ago,

And yes I would think a cold air feed would look awesome

[Dragonheart]

Ah, so it sort of like an external dump valve but for the exhaust instead of the turbo. Made a sh1t of his white paint though!

[johntony]

do you know what diameter the cold air intakes are cos the holes are fairly close to the original spots so i only really have 50mm to play with

[crayzidane]

Pipercross do piping:
http://www.pipercross.net/competition/products_accessories.asp
http://www.potn.co.uk/p2804310.htm