The Irish Mitsubishi FTO Owners Club

by **Dave1971** » Mon Sep 06, 2010 6:03 pm

How easy is it to setup the idle speed without using the equipment MUT-II if it can be done, mine appears to be idling around 1100 when it should be around 750rpm.

by **paul2508** » Mon Sep 06, 2010 6:10 pm

can you not adjust the idle screw when the car is warmed up?

by **Dave1971** » Mon Sep 06, 2010 6:33 pm

paul2508 wrote:can you not adjust the idle screw when the car is warmed up?

I can but it will only go as low as 1000rpm, if you turn the screw too far it makes the throttle stick unless you know of another way.

by CJ » Sat Sep 11, 2010 4:46 pm

Throttle position sensor positioned incorrectly perhaps?

CJ

by **Dave1971** » Sat Sep 11, 2010 5:09 pm

CJ wrote:Throttle position sensor positioned incorrectly perhaps?

CJ

I setup the TPS sensor according to the manual and confirmed the settings against my mates car, i will have a play with the idle screw again.

by CJ » Sat Sep 11, 2010 7:44 pm

Over-tensioned throttle cable?

by **Dave1971** » Sun Sep 12, 2010 6:08 pm

CJ wrote:Over-tensioned throttle cable?

No it's slack as the pro who Rooney was with

The Irish Mitsubishi FTO Owners Club

Idle Speed

Idle Speed

Re: Idle Speed

Re: Idle Speed

Re: Idle Speed

Re: Idle Speed

Re: Idle Speed

Re: Idle Speed

Who is online