Fan Belt

[Dave]

Folks,
what's involved in tightening the fan belt, i know technically it's not a fan belt but ye know what i mean.

it's a gpx by the way!

cheers

dave

[Mustang]

Dave,
Refer to this link on Steve Hemmings site.
http://www.mitsubishi-fto.org/workshop/ ... index.html
All you need to do is loosen the bolt in the centre of the tensioner wheel (which holds the tensioner in place), Then tighten the tensioner bolt which causes the tensioner move -tightening the belt. Once the required tension is achieved, tighten back up the bolt in the centre of the tensioner wheel, to hold the wheel in place. 14mm socket required.

Mustang

[Dave]

cheers