My GPvR, 1.3 Turbo, yes you got it right ;)

[brccrx]

Cat back done:







Boost amd oil pressure gauges fitted:





All connected and working.

http://vid1303.photobucket.com/albums/a ... rey71a.mp4

Also wideband fitted:



"Magic" clocks looks good with the gauges :









Little video here:

https://www.youtube.com/watch?v=DGAe8qjPrYs

[gazmcg89]

Looks great Seb fair play ! Can't wait to see it on the move

[brccrx]

Thanks Gary!

Car is driving since a little while but today for the first time i decided to see what shes when hit real boost so engine received 0.5 bar

Nothing that bad has happen but i have to recalculate the fuel map.

till 0.1-0.2 bar she goes very good, only thing im worry about is that shes loosing power when hitting anything over that??

A few pics to complete the topic.....







Adjustable over boost eliminator came today.......in bits



All soldered and fitted in to a nice tidy case:

[goz_83]

If you keep missing the toll payments, you'll run out of money to spend on your FTO

[brccrx]

True

Anyway.....,
She goes fine now just need to finish the fuel map fully.

http://youtu.be/nVY2u2g1yZo

[brccrx]

Back to update this topic as theres some work going on unrelated to 1.3 turbo set up.

Waiting for the Tein lowering springs ive tidy up the boot so the side trays with covers as well as the spare wheel are back in the car now:



Reinforced spare wheel cover:



And the boot look more or less complete now just need to clean the carpet or wash it, im not sure yet.



Also the sub is in just need to come up with a way to tie it down to stop it from moving.





Work continued at the long weekend:







And finally shes 2 eeee even 4 seater as the back seats are also fitted just no picture of it.



Some exterior tidy up now:















And a lot of updated engine bay look

[goz_83]

A couple of L brackets would be best for rigidity, but some straight brackets secured to the base of the sub would be neater. Spray them black before fixing.

[Temeeo]

Looks great Seb, what did you use for the scuttle panel? Satin black paint? I hear vinyl dye works great too and have also seen people using a heat gun. When is she going to be back on the road?

[brccrx]

Thanks mate.

Ive wash it, de greased, two coats of plastic primer, 2 coats of clear lacquer, job done

Shes driving fine just waiting for the Tein lowering springs to arrive and a few small bits and pieces need tidy up, NCT etc. etc.
Should be on the road this summer for a few months and a few hundred km

[brccrx]

Front bumper tidy up:







Ops...



Doesn't look as bad any more just not fitted properly yet as i need to pull the headlights off to get em resprayed with clear lacquer.







Added lightness to the interior.....







Bracket welded in to help support the whole construction.



Also double decker hi fi is in







Ever since ive fitted power steering there was a small leak so finally ive managed to find the source of it.



Replaced with spare seal and there no more annoying dark spots on the driveway.



Finally parts have arrived to!





So i went at changing the discs, springs and to finish 10's other annoying bits, also inspection plate on gearbox was letting some oil out so that got sorted too



About time lol!









One side no probs but when i went at drivers side, after removing the wheel ive spot this......



Sure that would fail the nct so i had to replace it







I must say they looks tasty lol





People be wondering why ive no progress with water/methanol injection, here's why haha

[goz_83]

Spray the calipers yellow

[Temeeo]

The discs are very tasty looking alright! I'll need to get a set shortly, was thinking to get either set from EBS or grooved and drilled set from Camskill, if you don't mind me asking where did you get them from?

The bumper came out great too, all it needs now is a nice new badge (MR300033) - about €15 from main dealer.

[brccrx]

The discs are very tasty looking alright! I'll need to get a set shortly, was thinking to get either set from EBS or grooved and drilled set from Camskill, if you don't mind me asking where did you get them from?

The bumper came out great too, all it needs now is a nice new badge (MR300033) - about €15 from main dealer.

Mikoda GT, made in PL, have very good reviews reasons i went with em. They were 70-80 a pair so not to bad at all.

Thanks, I was thinking that i need to come up with something for the badge, either buy it or paint it on the bumper, thanks a lot for the part number

[goz_83]

The badges are cheap on eBay

[brccrx]

Thanks, ive never thought of ebay! will look in to this.

As the pump and nozzle for water methanol injection still in the post front bumper being under some finishing work.



Bita boy racer style.....





Time to come to try sort out the headlights:

[brccrx]

More w/m injection pieces arrived, still no pump :{



Just put all back together so heres a few more pics:

[gazmcg89]

Looks nice and clean red grill wouldn't be for me but the rest looks great

[brccrx]

Looks nice and clean red grill wouldn't be for me but the rest looks great

As one lad said....

I like it, but same time it looks wrong haha

Whole project is like that, 1.3 turbo FTO with water methanol injection, that doesn't sound right at all

[brccrx]

The plan



Water/alcohol injection tank assembly:





Testing for leaks, full of water since a few days now, no single drop of water out of it, good!



Nozzle holder DIY design, i wonder should i register patent for it haha







More bits turned up:



Testing the true flow of 1GPH nozzle:



@55-60 psi ~65ml per minute, brilliant to start from!!!

Pump produce @ about 9.5v ~50psi of pressure, @ 12v ~80psi, @14v ~100psi
Nozzle at 80psi gives nice very fine fog like quality spray so injecting the mix pre turbo should give best results in my case.

Or if You impatient and have an account there go to read the whole thing

http://www.mitsipieces.com/forums/showt ... help/page3

[brccrx]

Fuel filter arrived......finally ya bolix:



@maxpower; proper hose it is sir



Pressure gauge fitted.



Tidy:



Tidy way to hide the volt meter too





No idea why but after everything is fitted the pressure creeps over the 100psi at 12v, not sure should i do something about it or not.....







Officially first (probably) ever water/alcohol injected FTO not mention the engine size etc up and running

[Bernard]

Congrats, great build and it's nice to be able to follow it here.
Well done.

[Sebastian]

yey ! well done mate , let us know how it drives

ps : that red grill looks awful

[brccrx]

Thanks!

If there would be no followers there would be no updates

Ah, i know Sebastian, i hate and i love it same time

[brccrx]

Fecked arch liner replaced:









Wire brushing ftw!



Time to sort out the rust a bit as there nothing too bad yet so better do it now.



















2 coats of Zinc primer:

[Superwofy]

What product did you use to get the underside looking so good?